My Cart

Horizontal stabiliser bar

SKU: 800543

help-icon Help with option selection

How do I find the right spare part?

To select the right spare part, you need the exact length of the part you require for your ladder. This guide shows you how to measure the length of your spare part in order to select the right one.

  1. The length of the horizontal stabiliser bar is determined by the length of the horizontal stabiliser bar including the correctly mounted ladder end caps.
  2. Use a ruler, for example, to measure the total length of the horizontal stabiliser bar, including the correctly mounted ladder end caps.

  3. If you do not find a horizontal stabiliser bar with the right length in the ZARGES range, select the next longer horizontal stabiliser bar. As long as all other dimensions (e.g. distance between holes, drill diameter, outer dimension of stile, etc.) fit exactly, a longer horizontal stabiliser bar will also fit. Make sure that you do not select a shorter horizontal stabiliser bar, as this will impair the stability of your ladder.
  1. Die Länge der Spreizsicherung ergibt sich aus dem Abstand zwischen den Bohrungen bzw dem äußeren Ende der Laschen.
  2. Messen sie z.B. mit einem Zollstock den Abstand zwischen den Mittelpunkten der Bohrungen bzw. den Laschen an den beiden Enden der Spreizsicherung
  3. Wähen sie die passende Größe der Spreizsicherung aus
  1. The length of the horizontal stabiliser bar is determined by the length of the horizontal stabiliser bar including the correctly mounted ladder end caps.
  2. Use a ruler, for example, to measure the total length of the horizontal stabiliser bar, including the correctly mounted ladder end caps.

  3. If you do not find a horizontal stabiliser bar with the right length in the ZARGES range, select the next longer horizontal stabiliser bar. As long as all other dimensions (e.g. distance between holes, drill diameter, outer dimension of stile, etc.) fit exactly, a longer horizontal stabiliser bar will also fit. Make sure that you do not select a shorter horizontal stabiliser bar, as this will impair the stability of your ladder.

Do you need help with your selection?

Contact our spare parts experts in customer service!

help-icon Help with option selection

How do I find the right spare part?

To select the correct spare part, you require the exact drill-hole spacing of the horizontal stabiliser bar of your ladder. In this guide, we show you how to measure the drill-hole spacing of your horizontal stabiliser bar in order to select the right spare part.

  1. First remove the existing horizontal stabiliser bar. To do this, loosen the hex bolts that connect the horizontal stabiliser bar to the ladder stiles.

  2. The exact circle centre of the drill holes from which the screws were loosened serves as a reference for measuring the distance between the holes.

  3. The drill- hole spacing is the distance between the two circle centre points of the two holes. Use a ruler, for instance, to measure the exact distance between the two holes.

  4. Select the appropriate product variant for the hole distance you measured. Also be aware of the right drill diameter of the selected product. This is specified in the product description.

Do you need help with your selection?

Contact our spare parts experts in customer service!

help-icon Help with option selection

How do I find the right spare part?

To select the correct spare part, you require the exact stile outside dimensions of your ladder. In this guide, we show you how to measure the stile outside dimensions of your ladder in order to select the correct spare part.

  1. Expose the ladder stile, e.g. by removing the ladder caps.
  2. Use a measuring calliper to measure the exact outside dimension of the ladder stile. Measure the width and depth of the ladder stile. Note down the dimensions.
  3. Select the spare part that matches the dimensions you noted. Caution: spare parts can differ only by a few millimetres. It is better to measure several times if you are unsure about which spare part is the right one.

Do you need help with your selection?

Contact our spare parts experts in customer service!

Contact ZARGES Add to Compare Download Product Datasheet (PDF) Product Documents
main product photo

Details

  • Attachment with M8 screw.
  • Further dimensions on request

Hints and special features

  • Due to design modifications, it is necessary to note not only the ladder type but also always the outside dimension of the stiles.

More Information

More Information
Warranty Missing translation
Stile dimensions 58 mm × 25 mm
Length 890 mm
Bore spacing 325mm
Drilling diameter 15,2 mm (M8)
Weight 0.8 kg

Variants

Order number Bore spacing Length Stile dimensions Weight
823871 325mm 745 mm 58 mm × 25 mm 0.7 kg
800543 325mm 890 mm 58 mm × 25 mm 0.8 kg
823872 395mm 745 mm 58 mm × 25 mm 0.7 kg
800544 395mm 790 mm 58 mm × 25 mm 0.8 kg
800545 395mm 900 mm 58 mm × 25 mm 0.8 kg
800546 395mm 1085 mm 58 mm × 25 mm 0.9 kg
823879 465mm 745 mm 58 mm × 25 mm 0.7 kg
800547 325mm 890 mm 73 mm × 25 mm 0.9 kg
800548 325mm 1085 mm 73 mm × 25 mm 1 kg
823877 395mm 890 mm 73 mm × 25 mm 0.9 kg
800542 395mm 1200 mm 73 mm × 25 mm 1 kg
823475 465mm 1000 mm 73 mm × 25 mm 0.9 kg
823981 465mm 1200 mm 73 mm × 25 mm 1 kg

Documents